Electrical Appliances

• rotational speed measurement
• measurement of the number of revolutions
• range: RPM 10.0 ~ 9999.9 rev/min

• Digital clamp multimeter True RMS for measuring AC current up to 600 A (50–100 Hz)
• DC and AC measurement up to 600 V: DC ±(0.5 % + 2), AC ±(0.8 % + 5)
• Resistance measurement (up to 60 MΩ), capacitance (up to 60 mF), frequency (10 Hz–10 MHz)
• Diode and continuity test with audible alarm (below 10 Ω)
• Autoranging, HOLD, MIN/MAX/REL, backlight, automatic shutdown

• True RMS digital multimeter with high resolution - for precise electrical measurements
• Large backlit LCD display +/- 22000 with analog pointer
• Wide measurement range: AC/DC, current, resistance, capacitance, frequency and more
• Additional features: NCV (non-contact voltage detection), diode and continuity test
• USB and safety protection CAT III 1000 V / CAT IV 600 V - ready for professional applications

• measurements at a distance of up to 50 meters
• measures lengths with an accuracy of +/- 2mm
• determines area, volume
• measurement result on a large display
• remote distance measurement (Pythagorean method)
• dual analog level
• comfortable and durable belt case

• Measures light intensity in the range up to 199,999 lux with an accuracy of ±(4 % + 8 units). 
• For foot-candle (FC) units: range up to 19,999 FC with an accuracy of ±(5 % + 10 units). 
• Resolution: 1 lux or 1 FC. 
• Sampling: 2 readings per second (2/s). 

• Easy determination of light intensity
• Precise light sensor on a wire
• Compact and ergonomic design

• Insulation resistance measurement at test voltages: 500 V, 1000 V, and 2500 V. 
• Insulation measurement range: at 500 V up to ~5 GΩ, at 2500 V up to ~20 GΩ. 
• Low resistance measurement: from 0Ω to 200Ω (or more) in "continuity" mode. 
• AC voltage measurement (30 V…600 V or up to 750 V depending on conditions) - which allows for preliminary verification if a given line is live. 
• Measurement of the polarization index (PI - Polarization Index) and the dielectric absorption ratio (DAR – Dielectric Absorption Ratio)

• Possibility of insulation test voltage: 100 V, 250 V, 500 V, and 1000 V DC. 
• Insulation resistance measurement range: from 0.1 MΩ to even ~10 GΩ for the full range of 1000 V. 
• DC voltage measurement up to 1000 V and AC up to 750 V
• Low resistance (continuity) measurement range from 0.1 Ω to ~999.9 Ω 
• Advanced functions: including polarization index (PI) measurement, dielectric absorption test (DAR), comparative function (COMPARE)
• Clear LCD display with backlight and analog bar (bar graph) 
• Automatic range switching (auto-range), automatic shutdown in case of inactivity

• Universality: the ability to measure both simple (2-wire) and full (3-wire) - provides flexibility in various conditions.
• Wide measurement range (up to 4000 Ω) - allows for use in many types of installations.
• Recording and backlight functions increase convenience when working in the field.
• Durable construction and a rich set of accessories (auxiliary grounding, cables) included

• Temperature measurement range: from -32 °C to 1100 °C (-25.6 °F to ~2012 °F)
• Measurement accuracy: typically +/- 1.5 °C for the range ≥0 °C. 
• Distance to spot ratio (D:S) is 20 : 1 
• Emissivity (ε) adjustable in the range from 0.1 to 1.0 
• Color EBTN display and a range of measurement modes: MAX/MIN/AVG/DIFF/HOLD, visual and audible high/low temperature alarms. 
• Additional features: display backlight, automatic shut-off, low battery indicator, data logging capability.

- measurement of AC/DC voltage up to 600V

- measurement of DC current with an accuracy of 0.1uA

- measurement of resistance up to 40M

- checking circuit continuity

- temperature: -10..1000°C

• True RMS digital multimeter for precise measurements
• Automatic range selection (Auto Range) and manual mode
• NCV function - non-contact voltage detection
• Clear, backlit LCD display
• Robust construction for professional and service applications

• LED voltage measurement indicator
• Phase sequence test
• Single phase voltage detection
• Continuity test
• RCD test
• Polarity detection: positive and negative

• LED voltage measurement indicator
• Phase sequence test
• Single phase voltage detection
• Circuit continuity test
• RCD test
• Polarity detection: positive and negative

• DC voltage: 400mV~4~40~400~600V
• AC voltage: 4V~40~400~600V
• resistance: 400Ohm~4kOhm~40~400kOhm~4MOhm~20MOhm
• temperature: -40~300C
• circuit continuity testing

• Professional True RMS digital multimeter with a large LCD display (6000 counts).
• IP65 protection class - dustproof and splash-resistant, durable against drops from 2 m.
• Wide measurement range: voltage (AC/DC up to 600 V), current (up to 20 A), resistance, capacitance, frequency, duty cycle, diode test, and continuity.
• Automatic and manual range selection (auto/manual range).
• Additional features: MIN/MAX, HOLD, PEAK HOLD, backlight, flashlight, settings memory, low battery indicator.
• Safety category: CAT III 600 V.

• Wind speed measurement: up to 30 m/s (108 km/h), with high accuracy
• Ambient temperature measurement: in °C or °F
• Hold function: freeze the result on the screen
• LCD display with backlight – excellent readability even in low light
• Automatic shutdown – energy saving

• Measurement of wood moisture over a wide range (2-40 %) with a resolution of 0.1 %
• Accuracy ±2 % - sufficient guarantee of result reliability for most control work
• Four categories of wood, ~28 reference species - allows for setting adjustments according to the type of wood
• Temperature compensation - reduces errors resulting from the influence of ambient temperature
• Drop resistance from about 1 meter - greater durability and safety in field use

• Compact and lightweight design – convenient for carrying in your pocket or tool bag.
• High accuracy of measurements across a wide range of voltages and currents.
• Support for USB-A and USB-C in one device.
• Data logging function allows for analysis of long-term charging processes.
• Simple operation – just connect the tester between the power source and the receiving device.

• rated voltage: 230 V AC ±10%
• current frequency: 50hz
• testing of residual current devices RCD

• non-contact AC voltage indicator
• built-in buzzer

• Non-contact AC voltage detector: range 24–1000 V (Low), 90–1000 V (High)
• Magnetic field detection (solenoids, coils, relays)
• Indication: LED + buzzer, signal frequency increases when approaching the wire
• LED flashlight and low battery indication
• Resistance: IP67, drops up to 2 m, auto shut-off

• Device for measuring voltages from 12 to 690 AC/DC
• Automatic selection of measurement function
• Optical and acoustic signaling
• Integrated LED flashlight
• Indication of dangerous voltage